Lemma is an Electromagnetics API
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.

Doxyfile.in 67KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644
  1. # Doxyfile 1.7.1
  2. # This file describes the settings to be used by the documentation system
  3. # doxygen (www.doxygen.org) for a project
  4. #
  5. # All text after a hash (#) is considered a comment and will be ignored
  6. # The format is:
  7. # TAG = value [value, ...]
  8. # For lists items can also be appended using:
  9. # TAG += value [value, ...]
  10. # Values that contain spaces should be placed between quotes (" ")
  11. #---------------------------------------------------------------------------
  12. # Project related configuration options
  13. #---------------------------------------------------------------------------
  14. # This tag specifies the encoding used for all characters in the config file
  15. # that follow. The default is UTF-8 which is also the encoding used for all
  16. # text before the first occurrence of this tag. Doxygen uses libiconv (or the
  17. # iconv built into libc) for the transcoding. See
  18. # http://www.gnu.org/software/libiconv for the list of possible encodings.
  19. DOXYFILE_ENCODING = UTF-8
  20. # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
  21. # by quotes) that should identify the project.
  22. PROJECT_NAME = Lemma
  23. # The PROJECT_NUMBER tag can be used to enter a project or revision number.
  24. # This could be handy for archiving the generated documentation or
  25. # if some version control system is used.
  26. PROJECT_NUMBER = @LEMMA_VERSION_MAJOR@.@LEMMA_VERSION_MINOR@.@LEMMA_VERSION_PATCH@
  27. # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
  28. # base path where the generated documentation will be put.
  29. # If a relative path is entered, it will be relative to the location
  30. # where doxygen was started. If left blank the current directory will be used.
  31. OUTPUT_DIRECTORY =
  32. # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
  33. # 4096 sub-directories (in 2 levels) under the output directory of each output
  34. # format and will distribute the generated files over these directories.
  35. # Enabling this option can be useful when feeding doxygen a huge amount of
  36. # source files, where putting all generated files in the same directory would
  37. # otherwise cause performance problems for the file system.
  38. CREATE_SUBDIRS = NO
  39. # The OUTPUT_LANGUAGE tag is used to specify the language in which all
  40. # documentation generated by doxygen is written. Doxygen will use this
  41. # information to generate all constant output in the proper language.
  42. # The default language is English, other supported languages are:
  43. # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
  44. # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
  45. # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
  46. # messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
  47. # Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
  48. # Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
  49. OUTPUT_LANGUAGE = English
  50. # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
  51. # include brief member descriptions after the members that are listed in
  52. # the file and class documentation (similar to JavaDoc).
  53. # Set to NO to disable this.
  54. BRIEF_MEMBER_DESC = YES
  55. # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
  56. # the brief description of a member or function before the detailed description.
  57. # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
  58. # brief descriptions will be completely suppressed.
  59. REPEAT_BRIEF = YES
  60. # This tag implements a quasi-intelligent brief description abbreviator
  61. # that is used to form the text in various listings. Each string
  62. # in this list, if found as the leading text of the brief description, will be
  63. # stripped from the text and the result after processing the whole list, is
  64. # used as the annotated text. Otherwise, the brief description is used as-is.
  65. # If left blank, the following values are used ("$name" is automatically
  66. # replaced with the name of the entity): "The $name class" "The $name widget"
  67. # "The $name file" "is" "provides" "specifies" "contains"
  68. # "represents" "a" "an" "the"
  69. ABBREVIATE_BRIEF =
  70. # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
  71. # Doxygen will generate a detailed section even if there is only a brief
  72. # description.
  73. ALWAYS_DETAILED_SEC = NO
  74. # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
  75. # inherited members of a class in the documentation of that class as if those
  76. # members were ordinary class members. Constructors, destructors and assignment
  77. # operators of the base classes will not be shown.
  78. INLINE_INHERITED_MEMB = NO
  79. # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
  80. # path before files name in the file list and in the header files. If set
  81. # to NO the shortest path that makes the file name unique will be used.
  82. FULL_PATH_NAMES = YES
  83. # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
  84. # can be used to strip a user-defined part of the path. Stripping is
  85. # only done if one of the specified strings matches the left-hand part of
  86. # the path. The tag can be used to show relative paths in the file list.
  87. # If left blank the directory from which doxygen is run is used as the
  88. # path to strip.
  89. STRIP_FROM_PATH =
  90. # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
  91. # the path mentioned in the documentation of a class, which tells
  92. # the reader which header file to include in order to use a class.
  93. # If left blank only the name of the header file containing the class
  94. # definition is used. Otherwise one should specify the include paths that
  95. # are normally passed to the compiler using the -I flag.
  96. STRIP_FROM_INC_PATH =
  97. # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
  98. # (but less readable) file names. This can be useful is your file systems
  99. # doesn't support long names like on DOS, Mac, or CD-ROM.
  100. SHORT_NAMES = NO
  101. # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
  102. # will interpret the first line (until the first dot) of a JavaDoc-style
  103. # comment as the brief description. If set to NO, the JavaDoc
  104. # comments will behave just like regular Qt-style comments
  105. # (thus requiring an explicit @brief command for a brief description.)
  106. JAVADOC_AUTOBRIEF = YES
  107. # If the QT_AUTOBRIEF tag is set to YES then Doxygen will
  108. # interpret the first line (until the first dot) of a Qt-style
  109. # comment as the brief description. If set to NO, the comments
  110. # will behave just like regular Qt-style comments (thus requiring
  111. # an explicit \brief command for a brief description.)
  112. QT_AUTOBRIEF = NO
  113. # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
  114. # treat a multi-line C++ special comment block (i.e. a block of //! or ///
  115. # comments) as a brief description. This used to be the default behaviour.
  116. # The new default is to treat a multi-line C++ comment block as a detailed
  117. # description. Set this tag to YES if you prefer the old behaviour instead.
  118. MULTILINE_CPP_IS_BRIEF = YES
  119. # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
  120. # member inherits the documentation from any documented member that it
  121. # re-implements.
  122. INHERIT_DOCS = YES
  123. # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
  124. # a new page for each member. If set to NO, the documentation of a member will
  125. # be part of the file/class/namespace that contains it.
  126. SEPARATE_MEMBER_PAGES = NO
  127. # The TAB_SIZE tag can be used to set the number of spaces in a tab.
  128. # Doxygen uses this value to replace tabs by spaces in code fragments.
  129. TAB_SIZE = 4
  130. # This tag can be used to specify a number of aliases that acts
  131. # as commands in the documentation. An alias has the form "name=value".
  132. # For example adding "sideeffect=\par Side Effects:\n" will allow you to
  133. # put the command \sideeffect (or @sideeffect) in the documentation, which
  134. # will result in a user-defined paragraph with heading "Side Effects:".
  135. # You can put \n's in the value part of an alias to insert newlines.
  136. ALIASES =
  137. # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
  138. # sources only. Doxygen will then generate output that is more tailored for C.
  139. # For instance, some of the names that are used will be different. The list
  140. # of all members will be omitted, etc.
  141. OPTIMIZE_OUTPUT_FOR_C = YES
  142. # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
  143. # sources only. Doxygen will then generate output that is more tailored for
  144. # Java. For instance, namespaces will be presented as packages, qualified
  145. # scopes will look different, etc.
  146. OPTIMIZE_OUTPUT_JAVA = NO
  147. # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
  148. # sources only. Doxygen will then generate output that is more tailored for
  149. # Fortran.
  150. OPTIMIZE_FOR_FORTRAN = NO
  151. # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
  152. # sources. Doxygen will then generate output that is tailored for
  153. # VHDL.
  154. OPTIMIZE_OUTPUT_VHDL = NO
  155. # Doxygen selects the parser to use depending on the extension of the files it
  156. # parses. With this tag you can assign which parser to use for a given extension.
  157. # Doxygen has a built-in mapping, but you can override or extend it using this
  158. # tag. The format is ext=language, where ext is a file extension, and language
  159. # is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
  160. # C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
  161. # doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
  162. # (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
  163. # you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
  164. EXTENSION_MAPPING =
  165. # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
  166. # to include (a tag file for) the STL sources as input, then you should
  167. # set this tag to YES in order to let doxygen match functions declarations and
  168. # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
  169. # func(std::string) {}). This also make the inheritance and collaboration
  170. # diagrams that involve STL classes more complete and accurate.
  171. BUILTIN_STL_SUPPORT = YES
  172. # If you use Microsoft's C++/CLI language, you should set this option to YES to
  173. # enable parsing support.
  174. CPP_CLI_SUPPORT = NO
  175. # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
  176. # Doxygen will parse them like normal C++ but will assume all classes use public
  177. # instead of private inheritance when no explicit protection keyword is present.
  178. SIP_SUPPORT = NO
  179. # For Microsoft's IDL there are propget and propput attributes to indicate getter
  180. # and setter methods for a property. Setting this option to YES (the default)
  181. # will make doxygen to replace the get and set methods by a property in the
  182. # documentation. This will only work if the methods are indeed getting or
  183. # setting a simple type. If this is not the case, or you want to show the
  184. # methods anyway, you should set this option to NO.
  185. IDL_PROPERTY_SUPPORT = YES
  186. # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
  187. # tag is set to YES, then doxygen will reuse the documentation of the first
  188. # member in the group (if any) for the other members of the group. By default
  189. # all members of a group must be documented explicitly.
  190. DISTRIBUTE_GROUP_DOC = NO
  191. # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
  192. # the same type (for instance a group of public functions) to be put as a
  193. # subgroup of that type (e.g. under the Public Functions section). Set it to
  194. # NO to prevent subgrouping. Alternatively, this can be done per class using
  195. # the \nosubgrouping command.
  196. SUBGROUPING = YES
  197. # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
  198. # is documented as struct, union, or enum with the name of the typedef. So
  199. # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
  200. # with name TypeT. When disabled the typedef will appear as a member of a file,
  201. # namespace, or class. And the struct will be named TypeS. This can typically
  202. # be useful for C code in case the coding convention dictates that all compound
  203. # types are typedef'ed and only the typedef is referenced, never the tag name.
  204. TYPEDEF_HIDES_STRUCT = NO
  205. # The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
  206. # determine which symbols to keep in memory and which to flush to disk.
  207. # When the cache is full, less often used symbols will be written to disk.
  208. # For small to medium size projects (<1000 input files) the default value is
  209. # probably good enough. For larger projects a too small cache size can cause
  210. # doxygen to be busy swapping symbols to and from disk most of the time
  211. # causing a significant performance penality.
  212. # If the system has enough physical memory increasing the cache will improve the
  213. # performance by keeping more symbols in memory. Note that the value works on
  214. # a logarithmic scale so increasing the size by one will rougly double the
  215. # memory usage. The cache size is given by this formula:
  216. # 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
  217. # corresponding to a cache size of 2^16 = 65536 symbols
  218. SYMBOL_CACHE_SIZE = 0
  219. #---------------------------------------------------------------------------
  220. # Build related configuration options
  221. #---------------------------------------------------------------------------
  222. # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
  223. # documentation are documented, even if no documentation was available.
  224. # Private class members and static file members will be hidden unless
  225. # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
  226. EXTRACT_ALL = NO
  227. # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
  228. # will be included in the documentation.
  229. EXTRACT_PRIVATE = NO
  230. # If the EXTRACT_STATIC tag is set to YES all static members of a file
  231. # will be included in the documentation.
  232. EXTRACT_STATIC = NO
  233. # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
  234. # defined locally in source files will be included in the documentation.
  235. # If set to NO only classes defined in header files are included.
  236. EXTRACT_LOCAL_CLASSES = YES
  237. # This flag is only useful for Objective-C code. When set to YES local
  238. # methods, which are defined in the implementation section but not in
  239. # the interface are included in the documentation.
  240. # If set to NO (the default) only methods in the interface are included.
  241. EXTRACT_LOCAL_METHODS = NO
  242. # If this flag is set to YES, the members of anonymous namespaces will be
  243. # extracted and appear in the documentation as a namespace called
  244. # 'anonymous_namespace{file}', where file will be replaced with the base
  245. # name of the file that contains the anonymous namespace. By default
  246. # anonymous namespace are hidden.
  247. EXTRACT_ANON_NSPACES = NO
  248. # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
  249. # undocumented members of documented classes, files or namespaces.
  250. # If set to NO (the default) these members will be included in the
  251. # various overviews, but no documentation section is generated.
  252. # This option has no effect if EXTRACT_ALL is enabled.
  253. HIDE_UNDOC_MEMBERS = NO
  254. # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
  255. # undocumented classes that are normally visible in the class hierarchy.
  256. # If set to NO (the default) these classes will be included in the various
  257. # overviews. This option has no effect if EXTRACT_ALL is enabled.
  258. HIDE_UNDOC_CLASSES = NO
  259. # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
  260. # friend (class|struct|union) declarations.
  261. # If set to NO (the default) these declarations will be included in the
  262. # documentation.
  263. HIDE_FRIEND_COMPOUNDS = NO
  264. # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
  265. # documentation blocks found inside the body of a function.
  266. # If set to NO (the default) these blocks will be appended to the
  267. # function's detailed documentation block.
  268. HIDE_IN_BODY_DOCS = NO
  269. # The INTERNAL_DOCS tag determines if documentation
  270. # that is typed after a \internal command is included. If the tag is set
  271. # to NO (the default) then the documentation will be excluded.
  272. # Set it to YES to include the internal documentation.
  273. INTERNAL_DOCS = NO
  274. # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
  275. # file names in lower-case letters. If set to YES upper-case letters are also
  276. # allowed. This is useful if you have classes or files whose names only differ
  277. # in case and if your file system supports case sensitive file names. Windows
  278. # and Mac users are advised to set this option to NO.
  279. CASE_SENSE_NAMES = YES
  280. # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
  281. # will show members with their full class and namespace scopes in the
  282. # documentation. If set to YES the scope will be hidden.
  283. HIDE_SCOPE_NAMES = NO
  284. # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
  285. # will put a list of the files that are included by a file in the documentation
  286. # of that file.
  287. SHOW_INCLUDE_FILES = YES
  288. # If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
  289. # will list include files with double quotes in the documentation
  290. # rather than with sharp brackets.
  291. FORCE_LOCAL_INCLUDES = NO
  292. # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
  293. # is inserted in the documentation for inline members.
  294. INLINE_INFO = YES
  295. # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
  296. # will sort the (detailed) documentation of file and class members
  297. # alphabetically by member name. If set to NO the members will appear in
  298. # declaration order.
  299. SORT_MEMBER_DOCS = YES
  300. # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
  301. # brief documentation of file, namespace and class members alphabetically
  302. # by member name. If set to NO (the default) the members will appear in
  303. # declaration order.
  304. SORT_BRIEF_DOCS = NO
  305. # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
  306. # will sort the (brief and detailed) documentation of class members so that
  307. # constructors and destructors are listed first. If set to NO (the default)
  308. # the constructors will appear in the respective orders defined by
  309. # SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
  310. # This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
  311. # and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
  312. SORT_MEMBERS_CTORS_1ST = NO
  313. # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
  314. # hierarchy of group names into alphabetical order. If set to NO (the default)
  315. # the group names will appear in their defined order.
  316. SORT_GROUP_NAMES = NO
  317. # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
  318. # sorted by fully-qualified names, including namespaces. If set to
  319. # NO (the default), the class list will be sorted only by class name,
  320. # not including the namespace part.
  321. # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
  322. # Note: This option applies only to the class list, not to the
  323. # alphabetical list.
  324. SORT_BY_SCOPE_NAME = NO
  325. # The GENERATE_TODOLIST tag can be used to enable (YES) or
  326. # disable (NO) the todo list. This list is created by putting \todo
  327. # commands in the documentation.
  328. GENERATE_TODOLIST = YES
  329. # The GENERATE_TESTLIST tag can be used to enable (YES) or
  330. # disable (NO) the test list. This list is created by putting \test
  331. # commands in the documentation.
  332. GENERATE_TESTLIST = YES
  333. # The GENERATE_BUGLIST tag can be used to enable (YES) or
  334. # disable (NO) the bug list. This list is created by putting \bug
  335. # commands in the documentation.
  336. GENERATE_BUGLIST = YES
  337. # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
  338. # disable (NO) the deprecated list. This list is created by putting
  339. # \deprecated commands in the documentation.
  340. GENERATE_DEPRECATEDLIST= YES
  341. # The ENABLED_SECTIONS tag can be used to enable conditional
  342. # documentation sections, marked by \if sectionname ... \endif.
  343. ENABLED_SECTIONS =
  344. # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
  345. # the initial value of a variable or define consists of for it to appear in
  346. # the documentation. If the initializer consists of more lines than specified
  347. # here it will be hidden. Use a value of 0 to hide initializers completely.
  348. # The appearance of the initializer of individual variables and defines in the
  349. # documentation can be controlled using \showinitializer or \hideinitializer
  350. # command in the documentation regardless of this setting.
  351. MAX_INITIALIZER_LINES = 30
  352. # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
  353. # at the bottom of the documentation of classes and structs. If set to YES the
  354. # list will mention the files that were used to generate the documentation.
  355. SHOW_USED_FILES = YES
  356. # If the sources in your project are distributed over multiple directories
  357. # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
  358. # in the documentation. The default is NO.
  359. SHOW_DIRECTORIES = NO
  360. # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
  361. # This will remove the Files entry from the Quick Index and from the
  362. # Folder Tree View (if specified). The default is YES.
  363. SHOW_FILES = YES
  364. # Set the SHOW_NAMESPACES tag to NO to disable the generation of the
  365. # Namespaces page.
  366. # This will remove the Namespaces entry from the Quick Index
  367. # and from the Folder Tree View (if specified). The default is YES.
  368. SHOW_NAMESPACES = YES
  369. # The FILE_VERSION_FILTER tag can be used to specify a program or script that
  370. # doxygen should invoke to get the current version for each file (typically from
  371. # the version control system). Doxygen will invoke the program by executing (via
  372. # popen()) the command <command> <input-file>, where <command> is the value of
  373. # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
  374. # provided by doxygen. Whatever the program writes to standard output
  375. # is used as the file version. See the manual for examples.
  376. FILE_VERSION_FILTER =
  377. # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
  378. # by doxygen. The layout file controls the global structure of the generated
  379. # output files in an output format independent way. The create the layout file
  380. # that represents doxygen's defaults, run doxygen with the -l option.
  381. # You can optionally specify a file name after the option, if omitted
  382. # DoxygenLayout.xml will be used as the name of the layout file.
  383. LAYOUT_FILE =
  384. #---------------------------------------------------------------------------
  385. # configuration options related to warning and progress messages
  386. #---------------------------------------------------------------------------
  387. # The QUIET tag can be used to turn on/off the messages that are generated
  388. # by doxygen. Possible values are YES and NO. If left blank NO is used.
  389. QUIET = NO
  390. # The WARNINGS tag can be used to turn on/off the warning messages that are
  391. # generated by doxygen. Possible values are YES and NO. If left blank
  392. # NO is used.
  393. WARNINGS = YES
  394. # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
  395. # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
  396. # automatically be disabled.
  397. WARN_IF_UNDOCUMENTED = YES
  398. # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
  399. # potential errors in the documentation, such as not documenting some
  400. # parameters in a documented function, or documenting parameters that
  401. # don't exist or using markup commands wrongly.
  402. WARN_IF_DOC_ERROR = YES
  403. # This WARN_NO_PARAMDOC option can be abled to get warnings for
  404. # functions that are documented, but have no documentation for their parameters
  405. # or return value. If set to NO (the default) doxygen will only warn about
  406. # wrong or incomplete parameter documentation, but not about the absence of
  407. # documentation.
  408. WARN_NO_PARAMDOC = NO
  409. # The WARN_FORMAT tag determines the format of the warning messages that
  410. # doxygen can produce. The string should contain the $file, $line, and $text
  411. # tags, which will be replaced by the file and line number from which the
  412. # warning originated and the warning text. Optionally the format may contain
  413. # $version, which will be replaced by the version of the file (if it could
  414. # be obtained via FILE_VERSION_FILTER)
  415. WARN_FORMAT = "$file:$line: $text"
  416. # The WARN_LOGFILE tag can be used to specify a file to which warning
  417. # and error messages should be written. If left blank the output is written
  418. # to stderr.
  419. WARN_LOGFILE =
  420. #---------------------------------------------------------------------------
  421. # configuration options related to the input files
  422. #---------------------------------------------------------------------------
  423. # for rendering math
  424. USE_MATHJAX = YES
  425. # The INPUT tag can be used to specify the files and/or directories that contain
  426. # documented source files. You may enter file names like "myfile.cpp" or
  427. # directories like "/usr/src/myproject". Separate the files or directories
  428. # with spaces.
  429. #INPUT = ./include ./Documentation/dox ./modules/Wavelet/include ./modules/Merlin/include ./modules/FEM4EllipticPDE/include ./modules/EMSchur3D/include
  430. #INPUT = @CMAKE_CURRENT_SOURCE_DIR@/LemmaCore/include @CMAKE_CURRENT_SOURCE_DIR@/Modules/FEM4EllipticPDE.git/include
  431. INPUT = @CMAKE_CURRENT_SOURCE_DIR@/LemmaCore/include @CMAKE_CURRENT_SOURCE_DIR@/Modules/*/include
  432. INPUT += @CMAKE_CURRENT_SOURCE_DIR@/Modules/
  433. # This tag can be used to specify the character encoding of the source files
  434. # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
  435. # also the default input encoding. Doxygen uses libiconv (or the iconv built
  436. # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
  437. # the list of possible encodings.
  438. INPUT_ENCODING = UTF-8
  439. # If the value of the INPUT tag contains directories, you can use the
  440. # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
  441. # and *.h) to filter out the source-files in the directories. If left
  442. # blank the following patterns are tested:
  443. # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
  444. # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
  445. FILE_PATTERNS = *.h \
  446. *.cpp \
  447. *.dox
  448. # The RECURSIVE tag can be used to turn specify whether or not subdirectories
  449. # should be searched for input files as well. Possible values are YES and NO.
  450. # If left blank NO is used.
  451. RECURSIVE = YES
  452. # The EXCLUDE tag can be used to specify files and/or directories that should
  453. # excluded from the INPUT source files. This way you can easily exclude a
  454. # subdirectory from a directory tree whose root is specified with the INPUT tag.
  455. EXCLUDE =
  456. # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
  457. # directories that are symbolic links (a Unix filesystem feature) are excluded
  458. # from the input.
  459. EXCLUDE_SYMLINKS = NO
  460. # If the value of the INPUT tag contains directories, you can use the
  461. # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
  462. # certain files from those directories. Note that the wildcards are matched
  463. # against the file with absolute path, so to exclude all test directories
  464. # for example use the pattern */test/*
  465. EXCLUDE_PATTERNS =
  466. # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
  467. # (namespaces, classes, functions, etc.) that should be excluded from the
  468. # output. The symbol name can be a fully qualified name, a word, or if the
  469. # wildcard * is used, a substring. Examples: ANamespace, AClass,
  470. # AClass::ANamespace, ANamespace::*Test
  471. EXCLUDE_SYMBOLS =
  472. # The EXAMPLE_PATH tag can be used to specify one or more files or
  473. # directories that contain example code fragments that are included (see
  474. # the \include command).
  475. EXAMPLE_PATH = ./unittest \
  476. ./
  477. # If the value of the EXAMPLE_PATH tag contains directories, you can use the
  478. # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
  479. # and *.h) to filter out the source-files in the directories. If left
  480. # blank all files are included.
  481. EXAMPLE_PATTERNS =
  482. # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
  483. # searched for input files to be used with the \include or \dontinclude
  484. # commands irrespective of the value of the RECURSIVE tag.
  485. # Possible values are YES and NO. If left blank NO is used.
  486. EXAMPLE_RECURSIVE = NO
  487. # The IMAGE_PATH tag can be used to specify one or more files or
  488. # directories that contain image that are included in the documentation (see
  489. # the \image command).
  490. IMAGE_PATH = Documentation/icons
  491. # The INPUT_FILTER tag can be used to specify a program that doxygen should
  492. # invoke to filter for each input file. Doxygen will invoke the filter program
  493. # by executing (via popen()) the command <filter> <input-file>, where <filter>
  494. # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
  495. # input file. Doxygen will then use the output that the filter program writes
  496. # to standard output.
  497. # If FILTER_PATTERNS is specified, this tag will be
  498. # ignored.
  499. INPUT_FILTER =
  500. # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
  501. # basis.
  502. # Doxygen will compare the file name with each pattern and apply the
  503. # filter if there is a match.
  504. # The filters are a list of the form:
  505. # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
  506. # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
  507. # is applied to all files.
  508. FILTER_PATTERNS =
  509. # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
  510. # INPUT_FILTER) will be used to filter the input files when producing source
  511. # files to browse (i.e. when SOURCE_BROWSER is set to YES).
  512. FILTER_SOURCE_FILES = NO
  513. #---------------------------------------------------------------------------
  514. # configuration options related to source browsing
  515. #---------------------------------------------------------------------------
  516. # If the SOURCE_BROWSER tag is set to YES then a list of source files will
  517. # be generated. Documented entities will be cross-referenced with these sources.
  518. # Note: To get rid of all source code in the generated output, make sure also
  519. # VERBATIM_HEADERS is set to NO.
  520. SOURCE_BROWSER = NO
  521. # Setting the INLINE_SOURCES tag to YES will include the body
  522. # of functions and classes directly in the documentation.
  523. INLINE_SOURCES = NO
  524. # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
  525. # doxygen to hide any special comment blocks from generated source code
  526. # fragments. Normal C and C++ comments will always remain visible.
  527. STRIP_CODE_COMMENTS = YES
  528. # If the REFERENCED_BY_RELATION tag is set to YES
  529. # then for each documented function all documented
  530. # functions referencing it will be listed.
  531. REFERENCED_BY_RELATION = NO
  532. # If the REFERENCES_RELATION tag is set to YES
  533. # then for each documented function all documented entities
  534. # called/used by that function will be listed.
  535. REFERENCES_RELATION = NO
  536. # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
  537. # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
  538. # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
  539. # link to the source code.
  540. # Otherwise they will link to the documentation.
  541. REFERENCES_LINK_SOURCE = YES
  542. # If the USE_HTAGS tag is set to YES then the references to source code
  543. # will point to the HTML generated by the htags(1) tool instead of doxygen
  544. # built-in source browser. The htags tool is part of GNU's global source
  545. # tagging system (see http://www.gnu.org/software/global/global.html). You
  546. # will need version 4.8.6 or higher.
  547. USE_HTAGS = NO
  548. # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
  549. # will generate a verbatim copy of the header file for each class for
  550. # which an include is specified. Set to NO to disable this.
  551. VERBATIM_HEADERS = YES
  552. #---------------------------------------------------------------------------
  553. # configuration options related to the alphabetical class index
  554. #---------------------------------------------------------------------------
  555. # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
  556. # of all compounds will be generated. Enable this if the project
  557. # contains a lot of classes, structs, unions or interfaces.
  558. ALPHABETICAL_INDEX = NO
  559. # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
  560. # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
  561. # in which this list will be split (can be a number in the range [1..20])
  562. COLS_IN_ALPHA_INDEX = 5
  563. # In case all classes in a project start with a common prefix, all
  564. # classes will be put under the same header in the alphabetical index.
  565. # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
  566. # should be ignored while generating the index headers.
  567. IGNORE_PREFIX =
  568. #---------------------------------------------------------------------------
  569. # configuration options related to the HTML output
  570. #---------------------------------------------------------------------------
  571. # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
  572. # generate HTML output.
  573. GENERATE_HTML = YES
  574. # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
  575. # If a relative path is entered the value of OUTPUT_DIRECTORY will be
  576. # put in front of it. If left blank `html' will be used as the default path.
  577. HTML_OUTPUT = Documentation/html
  578. # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
  579. # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
  580. # doxygen will generate files with .html extension.
  581. HTML_FILE_EXTENSION = .html
  582. # The HTML_HEADER tag can be used to specify a personal HTML header for
  583. # each generated HTML page. If it is left blank doxygen will generate a
  584. # standard header.
  585. HTML_HEADER =
  586. # The HTML_FOOTER tag can be used to specify a personal HTML footer for
  587. # each generated HTML page. If it is left blank doxygen will generate a
  588. # standard footer.
  589. HTML_FOOTER =
  590. # If the HTML_TIMESTAMP tag is set to YES then the generated HTML
  591. # documentation will contain the timesstamp.
  592. HTML_TIMESTAMP = NO
  593. # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
  594. # style sheet that is used by each HTML page. It can be used to
  595. # fine-tune the look of the HTML output. If the tag is left blank doxygen
  596. # will generate a default style sheet. Note that doxygen will try to copy
  597. # the style sheet file to the HTML output directory, so don't put your own
  598. # stylesheet in the HTML output directory as well, or it will be erased!
  599. HTML_STYLESHEET =
  600. # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
  601. # Doxygen will adjust the colors in the stylesheet and background images
  602. # according to this color. Hue is specified as an angle on a colorwheel,
  603. # see http://en.wikipedia.org/wiki/Hue for more information.
  604. # For instance the value 0 represents red, 60 is yellow, 120 is green,
  605. # 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
  606. # The allowed range is 0 to 359.
  607. HTML_COLORSTYLE_HUE = 220
  608. # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
  609. # the colors in the HTML output. For a value of 0 the output will use
  610. # grayscales only. A value of 255 will produce the most vivid colors.
  611. HTML_COLORSTYLE_SAT = 100
  612. # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
  613. # the luminance component of the colors in the HTML output. Values below
  614. # 100 gradually make the output lighter, whereas values above 100 make
  615. # the output darker. The value divided by 100 is the actual gamma applied,
  616. # so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
  617. # and 100 does not change the gamma.
  618. HTML_COLORSTYLE_GAMMA = 80
  619. # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
  620. # page will contain the date and time when the page was generated. Setting
  621. # this to NO can help when comparing the output of multiple runs.
  622. HTML_TIMESTAMP = YES
  623. # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
  624. # files or namespaces will be aligned in HTML using tables. If set to
  625. # NO a bullet list will be used.
  626. HTML_ALIGN_MEMBERS = YES
  627. # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
  628. # documentation will contain sections that can be hidden and shown after the
  629. # page has loaded. For this to work a browser that supports
  630. # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
  631. # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
  632. HTML_DYNAMIC_SECTIONS = NO
  633. # If the GENERATE_DOCSET tag is set to YES, additional index files
  634. # will be generated that can be used as input for Apple's Xcode 3
  635. # integrated development environment, introduced with OSX 10.5 (Leopard).
  636. # To create a documentation set, doxygen will generate a Makefile in the
  637. # HTML output directory. Running make will produce the docset in that
  638. # directory and running "make install" will install the docset in
  639. # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
  640. # it at startup.
  641. # See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
  642. # for more information.
  643. GENERATE_DOCSET = NO
  644. # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
  645. # feed. A documentation feed provides an umbrella under which multiple
  646. # documentation sets from a single provider (such as a company or product suite)
  647. # can be grouped.
  648. DOCSET_FEEDNAME = "Doxygen generated docs"
  649. # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
  650. # should uniquely identify the documentation set bundle. This should be a
  651. # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
  652. # will append .docset to the name.
  653. DOCSET_BUNDLE_ID = org.doxygen.Project
  654. # When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
  655. # the documentation publisher. This should be a reverse domain-name style
  656. # string, e.g. com.mycompany.MyDocSet.documentation.
  657. DOCSET_PUBLISHER_ID = org.doxygen.Publisher
  658. # The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
  659. DOCSET_PUBLISHER_NAME = Publisher
  660. # If the GENERATE_HTMLHELP tag is set to YES, additional index files
  661. # will be generated that can be used as input for tools like the
  662. # Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
  663. # of the generated HTML documentation.
  664. GENERATE_HTMLHELP = NO
  665. # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
  666. # be used to specify the file name of the resulting .chm file. You
  667. # can add a path in front of the file if the result should not be
  668. # written to the html output directory.
  669. CHM_FILE =
  670. # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
  671. # be used to specify the location (absolute path including file name) of
  672. # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
  673. # the HTML help compiler on the generated index.hhp.
  674. HHC_LOCATION =
  675. # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
  676. # controls if a separate .chi index file is generated (YES) or that
  677. # it should be included in the master .chm file (NO).
  678. GENERATE_CHI = NO
  679. # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
  680. # is used to encode HtmlHelp index (hhk), content (hhc) and project file
  681. # content.
  682. CHM_INDEX_ENCODING =
  683. # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
  684. # controls whether a binary table of contents is generated (YES) or a
  685. # normal table of contents (NO) in the .chm file.
  686. BINARY_TOC = NO
  687. # The TOC_EXPAND flag can be set to YES to add extra items for group members
  688. # to the contents of the HTML help documentation and to the tree view.
  689. TOC_EXPAND = NO
  690. # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
  691. # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
  692. # that can be used as input for Qt's qhelpgenerator to generate a
  693. # Qt Compressed Help (.qch) of the generated HTML documentation.
  694. GENERATE_QHP = NO
  695. # If the QHG_LOCATION tag is specified, the QCH_FILE tag can
  696. # be used to specify the file name of the resulting .qch file.
  697. # The path specified is relative to the HTML output folder.
  698. QCH_FILE =
  699. # The QHP_NAMESPACE tag specifies the namespace to use when generating
  700. # Qt Help Project output. For more information please see
  701. # http://doc.trolltech.com/qthelpproject.html#namespace
  702. QHP_NAMESPACE = org.doxygen.Project
  703. # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
  704. # Qt Help Project output. For more information please see
  705. # http://doc.trolltech.com/qthelpproject.html#virtual-folders
  706. QHP_VIRTUAL_FOLDER = doc
  707. # If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
  708. # add. For more information please see
  709. # http://doc.trolltech.com/qthelpproject.html#custom-filters
  710. QHP_CUST_FILTER_NAME =
  711. # The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
  712. # custom filter to add. For more information please see
  713. # <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
  714. # Qt Help Project / Custom Filters</a>.
  715. QHP_CUST_FILTER_ATTRS =
  716. # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
  717. # project's
  718. # filter section matches.
  719. # <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
  720. # Qt Help Project / Filter Attributes</a>.
  721. QHP_SECT_FILTER_ATTRS =
  722. # If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
  723. # be used to specify the location of Qt's qhelpgenerator.
  724. # If non-empty doxygen will try to run qhelpgenerator on the generated
  725. # .qhp file.
  726. QHG_LOCATION =
  727. # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
  728. # will be generated, which together with the HTML files, form an Eclipse help
  729. # plugin. To install this plugin and make it available under the help contents
  730. # menu in Eclipse, the contents of the directory containing the HTML and XML
  731. # files needs to be copied into the plugins directory of eclipse. The name of
  732. # the directory within the plugins directory should be the same as
  733. # the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
  734. # the help appears.
  735. GENERATE_ECLIPSEHELP = NO
  736. # A unique identifier for the eclipse help plugin. When installing the plugin
  737. # the directory name containing the HTML and XML files should also have
  738. # this name.
  739. ECLIPSE_DOC_ID = org.doxygen.Project
  740. # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
  741. # top of each HTML page. The value NO (the default) enables the index and
  742. # the value YES disables it.
  743. DISABLE_INDEX = NO
  744. # This tag can be used to set the number of enum values (range [1..20])
  745. # that doxygen will group on one line in the generated HTML documentation.
  746. ENUM_VALUES_PER_LINE = 4
  747. # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
  748. # structure should be generated to display hierarchical information.
  749. # If the tag value is set to YES, a side panel will be generated
  750. # containing a tree-like index structure (just like the one that
  751. # is generated for HTML Help). For this to work a browser that supports
  752. # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
  753. # Windows users are probably better off using the HTML help feature.
  754. GENERATE_TREEVIEW = NONE
  755. # By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
  756. # and Class Hierarchy pages using a tree view instead of an ordered list.
  757. USE_INLINE_TREES = NO
  758. # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
  759. # used to set the initial width (in pixels) of the frame in which the tree
  760. # is shown.
  761. TREEVIEW_WIDTH = 250
  762. # When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
  763. # links to external symbols imported via tag files in a separate window.
  764. EXT_LINKS_IN_WINDOW = NO
  765. # Use this tag to change the font size of Latex formulas included
  766. # as images in the HTML documentation. The default is 10. Note that
  767. # when you change the font size after a successful doxygen run you need
  768. # to manually remove any form_*.png images from the HTML output directory
  769. # to force them to be regenerated.
  770. FORMULA_FONTSIZE = 10
  771. # Use the FORMULA_TRANPARENT tag to determine whether or not the images
  772. # generated for formulas are transparent PNGs. Transparent PNGs are
  773. # not supported properly for IE 6.0, but are supported on all modern browsers.
  774. # Note that when changing this option you need to delete any form_*.png files
  775. # in the HTML output before the changes have effect.
  776. FORMULA_TRANSPARENT = YES
  777. # When the SEARCHENGINE tag is enabled doxygen will generate a search box
  778. # for the HTML output. The underlying search engine uses javascript
  779. # and DHTML and should work on any modern browser. Note that when using
  780. # HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
  781. # (GENERATE_DOCSET) there is already a search function so this one should
  782. # typically be disabled. For large projects the javascript based search engine
  783. # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
  784. SEARCHENGINE = NO
  785. # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
  786. # implemented using a PHP enabled web server instead of at the web client
  787. # using Javascript. Doxygen will generate the search PHP script and index
  788. # file to put on the web server. The advantage of the server
  789. # based approach is that it scales better to large projects and allows
  790. # full text search. The disadvances is that it is more difficult to setup
  791. # and does not have live searching capabilities.
  792. SERVER_BASED_SEARCH = NO
  793. #---------------------------------------------------------------------------
  794. # configuration options related to the LaTeX output
  795. #---------------------------------------------------------------------------
  796. # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
  797. # generate Latex output.
  798. GENERATE_LATEX = YES
  799. # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
  800. # If a relative path is entered the value of OUTPUT_DIRECTORY will be
  801. # put in front of it. If left blank `latex' will be used as the default path.
  802. LATEX_OUTPUT = Documentation/latex
  803. # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
  804. # invoked. If left blank `latex' will be used as the default command name.
  805. # Note that when enabling USE_PDFLATEX this option is only used for
  806. # generating bitmaps for formulas in the HTML output, but not in the
  807. # Makefile that is written to the output directory.
  808. LATEX_CMD_NAME = latex
  809. # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
  810. # generate index for LaTeX. If left blank `makeindex' will be used as the
  811. # default command name.
  812. MAKEINDEX_CMD_NAME = makeindex
  813. # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
  814. # LaTeX documents. This may be useful for small projects and may help to
  815. # save some trees in general.
  816. COMPACT_LATEX = NO
  817. # The PAPER_TYPE tag can be used to set the paper type that is used
  818. # by the printer. Possible values are: a4, a4wide, letter, legal and
  819. # executive. If left blank a4wide will be used.
  820. PAPER_TYPE = a4
  821. # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
  822. # packages that should be included in the LaTeX output.
  823. EXTRA_PACKAGES = amsmath, amssymb
  824. # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
  825. # the generated latex document. The header should contain everything until
  826. # the first chapter. If it is left blank doxygen will generate a
  827. # standard header. Notice: only use this tag if you know what you are doing!
  828. LATEX_HEADER =
  829. #latex/header.tex
  830. # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
  831. # is prepared for conversion to pdf (using ps2pdf). The pdf file will
  832. # contain links (just like the HTML output) instead of page references
  833. # This makes the output suitable for online browsing using a pdf viewer.
  834. PDF_HYPERLINKS = YES
  835. # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
  836. # plain latex in the generated Makefile. Set this option to YES to get a
  837. # higher quality PDF documentation.
  838. USE_PDFLATEX = NO
  839. # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
  840. # command to the generated LaTeX files. This will instruct LaTeX to keep
  841. # running if errors occur, instead of asking the user for help.
  842. # This option is also used when generating formulas in HTML.
  843. LATEX_BATCHMODE = YES
  844. # If LATEX_HIDE_INDICES is set to YES then doxygen will not
  845. # include the index chapters (such as File Index, Compound Index, etc.)
  846. # in the output.
  847. LATEX_HIDE_INDICES = NO
  848. # If LATEX_SOURCE_CODE is set to YES then doxygen will include
  849. # source code with syntax highlighting in the LaTeX output.
  850. # Note that which sources are shown also depends on other settings
  851. # such as SOURCE_BROWSER.
  852. LATEX_SOURCE_CODE = NO
  853. #---------------------------------------------------------------------------
  854. # configuration options related to the RTF output
  855. #---------------------------------------------------------------------------
  856. # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
  857. # The RTF output is optimized for Word 97 and may not look very pretty with
  858. # other RTF readers or editors.
  859. GENERATE_RTF = NO
  860. # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
  861. # If a relative path is entered the value of OUTPUT_DIRECTORY will be
  862. # put in front of it. If left blank `rtf' will be used as the default path.
  863. RTF_OUTPUT = rtf
  864. # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
  865. # RTF documents. This may be useful for small projects and may help to
  866. # save some trees in general.
  867. COMPACT_RTF = NO
  868. # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
  869. # will contain hyperlink fields. The RTF file will
  870. # contain links (just like the HTML output) instead of page references.
  871. # This makes the output suitable for online browsing using WORD or other
  872. # programs which support those fields.
  873. # Note: wordpad (write) and others do not support links.
  874. RTF_HYPERLINKS = NO
  875. # Load stylesheet definitions from file. Syntax is similar to doxygen's
  876. # config file, i.e. a series of assignments. You only have to provide
  877. # replacements, missing definitions are set to their default value.
  878. RTF_STYLESHEET_FILE =
  879. # Set optional variables used in the generation of an rtf document.
  880. # Syntax is similar to doxygen's config file.
  881. RTF_EXTENSIONS_FILE =
  882. #---------------------------------------------------------------------------
  883. # configuration options related to the man page output
  884. #---------------------------------------------------------------------------
  885. # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
  886. # generate man pages
  887. GENERATE_MAN = NO
  888. # The MAN_OUTPUT tag is used to specify where the man pages will be put.
  889. # If a relative path is entered the value of OUTPUT_DIRECTORY will be
  890. # put in front of it. If left blank `man' will be used as the default path.
  891. MAN_OUTPUT = man
  892. # The MAN_EXTENSION tag determines the extension that is added to
  893. # the generated man pages (default is the subroutine's section .3)
  894. MAN_EXTENSION = .3
  895. # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
  896. # then it will generate one additional man file for each entity
  897. # documented in the real man page(s). These additional files
  898. # only source the real man page, but without them the man command
  899. # would be unable to find the correct page. The default is NO.
  900. MAN_LINKS = NO
  901. #---------------------------------------------------------------------------
  902. # configuration options related to the XML output
  903. #---------------------------------------------------------------------------
  904. # If the GENERATE_XML tag is set to YES Doxygen will
  905. # generate an XML file that captures the structure of
  906. # the code including all documentation.
  907. GENERATE_XML = NO
  908. # The XML_OUTPUT tag is used to specify where the XML pages will be put.
  909. # If a relative path is entered the value of OUTPUT_DIRECTORY will be
  910. # put in front of it. If left blank `xml' will be used as the default path.
  911. XML_OUTPUT = xml
  912. # The XML_SCHEMA tag can be used to specify an XML schema,
  913. # which can be used by a validating XML parser to check the
  914. # syntax of the XML files.
  915. XML_SCHEMA =
  916. # The XML_DTD tag can be used to specify an XML DTD,
  917. # which can be used by a validating XML parser to check the
  918. # syntax of the XML files.
  919. XML_DTD =
  920. # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
  921. # dump the program listings (including syntax highlighting
  922. # and cross-referencing information) to the XML output. Note that
  923. # enabling this will significantly increase the size of the XML output.
  924. XML_PROGRAMLISTING = YES
  925. #---------------------------------------------------------------------------
  926. # configuration options for the AutoGen Definitions output
  927. #---------------------------------------------------------------------------
  928. # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
  929. # generate an AutoGen Definitions (see autogen.sf.net) file
  930. # that captures the structure of the code including all
  931. # documentation. Note that this feature is still experimental
  932. # and incomplete at the moment.
  933. GENERATE_AUTOGEN_DEF = NO
  934. #---------------------------------------------------------------------------
  935. # configuration options related to the Perl module output
  936. #---------------------------------------------------------------------------
  937. # If the GENERATE_PERLMOD tag is set to YES Doxygen will
  938. # generate a Perl module file that captures the structure of
  939. # the code including all documentation. Note that this
  940. # feature is still experimental and incomplete at the
  941. # moment.
  942. GENERATE_PERLMOD = NO
  943. # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
  944. # the necessary Makefile rules, Perl scripts and LaTeX code to be able
  945. # to generate PDF and DVI output from the Perl module output.
  946. PERLMOD_LATEX = NO
  947. # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
  948. # nicely formatted so it can be parsed by a human reader.
  949. # This is useful
  950. # if you want to understand what is going on.
  951. # On the other hand, if this
  952. # tag is set to NO the size of the Perl module output will be much smaller
  953. # and Perl will parse it just the same.
  954. PERLMOD_PRETTY = YES
  955. # The names of the make variables in the generated doxyrules.make file
  956. # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
  957. # This is useful so different doxyrules.make files included by the same
  958. # Makefile don't overwrite each other's variables.
  959. PERLMOD_MAKEVAR_PREFIX =
  960. #---------------------------------------------------------------------------
  961. # Configuration options related to the preprocessor
  962. #---------------------------------------------------------------------------
  963. # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
  964. # evaluate all C-preprocessor directives found in the sources and include
  965. # files.
  966. ENABLE_PREPROCESSING = YES
  967. # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
  968. # names in the source code. If set to NO (the default) only conditional
  969. # compilation will be performed. Macro expansion can be done in a controlled
  970. # way by setting EXPAND_ONLY_PREDEF to YES.
  971. MACRO_EXPANSION = NO
  972. # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
  973. # then the macro expansion is limited to the macros specified with the
  974. # PREDEFINED and EXPAND_AS_DEFINED tags.
  975. EXPAND_ONLY_PREDEF = NO
  976. # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
  977. # in the INCLUDE_PATH (see below) will be search if a #include is found.
  978. SEARCH_INCLUDES = YES
  979. # The INCLUDE_PATH tag can be used to specify one or more directories that
  980. # contain include files that are not input files but should be processed by
  981. # the preprocessor.
  982. INCLUDE_PATH =
  983. # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
  984. # patterns (like *.h and *.hpp) to filter out the header-files in the
  985. # directories. If left blank, the patterns specified with FILE_PATTERNS will
  986. # be used.
  987. INCLUDE_FILE_PATTERNS =
  988. # The PREDEFINED tag can be used to specify one or more macro names that
  989. # are defined before the preprocessor is started (similar to the -D option of
  990. # gcc). The argument of the tag is a list of macros of the form: name
  991. # or name=definition (no spaces). If the definition and the = are
  992. # omitted =1 is assumed. To prevent a macro definition from being
  993. # undefined via #undef or recursively expanded use the := operator
  994. # instead of the = operator.
  995. PREDEFINED = LEMMAUSEVTK HAVE_YAMLCPP
  996. # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
  997. # this tag can be used to specify a list of macro names that should be expanded.
  998. # The macro definition that is found in the sources will be used.
  999. # Use the PREDEFINED tag if you want to use a different macro definition.
  1000. EXPAND_AS_DEFINED =
  1001. # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
  1002. # doxygen's preprocessor will remove all function-like macros that are alone
  1003. # on a line, have an all uppercase name, and do not end with a semicolon. Such
  1004. # function macros are typically used for boiler-plate code, and will confuse
  1005. # the parser if not removed.
  1006. SKIP_FUNCTION_MACROS = YES
  1007. #---------------------------------------------------------------------------
  1008. # Configuration::additions related to external references
  1009. #---------------------------------------------------------------------------
  1010. # The TAGFILES option can be used to specify one or more tagfiles.
  1011. # Optionally an initial location of the external documentation
  1012. # can be added for each tagfile. The format of a tag file without
  1013. # this location is as follows:
  1014. #
  1015. # TAGFILES = file1 file2 ...
  1016. # Adding location for the tag files is done as follows:
  1017. #
  1018. # TAGFILES = file1=loc1 "file2 = loc2" ...
  1019. # where "loc1" and "loc2" can be relative or absolute paths or
  1020. # URLs. If a location is present for each tag, the installdox tool
  1021. # does not have to be run to correct the links.
  1022. # Note that each tag file must have a unique name
  1023. # (where the name does NOT include the path)
  1024. # If a tag file is not located in the directory in which doxygen
  1025. # is run, you must also specify the path to the tagfile here.
  1026. TAGFILES =
  1027. # When a file name is specified after GENERATE_TAGFILE, doxygen will create
  1028. # a tag file that is based on the input files it reads.
  1029. GENERATE_TAGFILE =
  1030. # If the ALLEXTERNALS tag is set to YES all external classes will be listed
  1031. # in the class index. If set to NO only the inherited external classes
  1032. # will be listed.
  1033. ALLEXTERNALS = NO
  1034. # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
  1035. # in the modules index. If set to NO, only the current project's groups will
  1036. # be listed.
  1037. EXTERNAL_GROUPS = YES
  1038. # The PERL_PATH should be the absolute path and name of the perl script
  1039. # interpreter (i.e. the result of `which perl').
  1040. PERL_PATH = /usr/bin/perl
  1041. #---------------------------------------------------------------------------
  1042. # Configuration options related to the dot tool
  1043. #---------------------------------------------------------------------------
  1044. # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
  1045. # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
  1046. # or super classes. Setting the tag to NO turns the diagrams off. Note that
  1047. # this option is superseded by the HAVE_DOT option below. This is only a
  1048. # fallback. It is recommended to install and use dot, since it yields more
  1049. # powerful graphs.
  1050. CLASS_DIAGRAMS = YES
  1051. # You can define message sequence charts within doxygen comments using the \msc
  1052. # command. Doxygen will then run the mscgen tool (see
  1053. # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
  1054. # documentation. The MSCGEN_PATH tag allows you to specify the directory where
  1055. # the mscgen tool resides. If left empty the tool is assumed to be found in the
  1056. # default search path.
  1057. MSCGEN_PATH =
  1058. # If set to YES, the inheritance and collaboration graphs will hide
  1059. # inheritance and usage relations if the target is undocumented
  1060. # or is not a class.
  1061. HIDE_UNDOC_RELATIONS = YES
  1062. # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
  1063. # available from the path. This tool is part of Graphviz, a graph visualization
  1064. # toolkit from AT&T and Lucent Bell Labs. The other options in this section
  1065. # have no effect if this option is set to NO (the default)
  1066. HAVE_DOT = YES
  1067. # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
  1068. # allowed to run in parallel. When set to 0 (the default) doxygen will
  1069. # base this on the number of processors available in the system. You can set it
  1070. # explicitly to a value larger than 0 to get control over the balance
  1071. # between CPU load and processing speed.
  1072. DOT_NUM_THREADS = 0
  1073. # By default doxygen will write a font called FreeSans.ttf to the output
  1074. # directory and reference it in all dot files that doxygen generates. This
  1075. # font does not include all possible unicode characters however, so when you need
  1076. # these (or just want a differently looking font) you can specify the font name
  1077. # using DOT_FONTNAME. You need need to make sure dot is able to find the font,
  1078. # which can be done by putting it in a standard location or by setting the
  1079. # DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
  1080. # containing the font.
  1081. DOT_FONTNAME = FreeSans
  1082. # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
  1083. # The default size is 10pt.
  1084. DOT_FONTSIZE = 10
  1085. # By default doxygen will tell dot to use the output directory to look for the
  1086. # FreeSans.ttf font (which doxygen will put there itself). If you specify a
  1087. # different font using DOT_FONTNAME you can set the path where dot
  1088. # can find it using this tag.
  1089. DOT_FONTPATH =
  1090. # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
  1091. # will generate a graph for each documented class showing the direct and
  1092. # indirect inheritance relations. Setting this tag to YES will force the
  1093. # the CLASS_DIAGRAMS tag to NO.
  1094. CLASS_GRAPH = YES
  1095. # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
  1096. # will generate a graph for each documented class showing the direct and
  1097. # indirect implementation dependencies (inheritance, containment, and
  1098. # class references variables) of the class with other documented classes.
  1099. COLLABORATION_GRAPH = YES
  1100. # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
  1101. # will generate a graph for groups, showing the direct groups dependencies
  1102. GROUP_GRAPHS = YES
  1103. # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
  1104. # collaboration diagrams in a style similar to the OMG's Unified Modeling
  1105. # Language.
  1106. UML_LOOK = NO
  1107. # If set to YES, the inheritance and collaboration graphs will show the
  1108. # relations between templates and their instances.
  1109. TEMPLATE_RELATIONS = NO
  1110. # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
  1111. # tags are set to YES then doxygen will generate a graph for each documented
  1112. # file showing the direct and indirect include dependencies of the file with
  1113. # other documented files.
  1114. INCLUDE_GRAPH = YES
  1115. # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
  1116. # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
  1117. # documented header file showing the documented files that directly or
  1118. # indirectly include this file.
  1119. INCLUDED_BY_GRAPH = YES
  1120. # If the CALL_GRAPH and HAVE_DOT options are set to YES then
  1121. # doxygen will generate a call dependency graph for every global function
  1122. # or class method. Note that enabling this option will significantly increase
  1123. # the time of a run. So in most cases it will be better to enable call graphs
  1124. # for selected functions only using the \callgraph command.
  1125. CALL_GRAPH = NO
  1126. # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
  1127. # doxygen will generate a caller dependency graph for every global function
  1128. # or class method. Note that enabling this option will significantly increase
  1129. # the time of a run. So in most cases it will be better to enable caller
  1130. # graphs for selected functions only using the \callergraph command.
  1131. CALLER_GRAPH = NO
  1132. # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
  1133. # will graphical hierarchy of all classes instead of a textual one.
  1134. GRAPHICAL_HIERARCHY = YES
  1135. # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
  1136. # then doxygen will show the dependencies a directory has on other directories
  1137. # in a graphical way. The dependency relations are determined by the #include
  1138. # relations between the files in the directories.
  1139. DIRECTORY_GRAPH = YES
  1140. # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
  1141. # generated by dot. Possible values are png, jpg, or gif
  1142. # If left blank png will be used.
  1143. DOT_IMAGE_FORMAT = png
  1144. # The tag DOT_PATH can be used to specify the path where the dot tool can be
  1145. # found. If left blank, it is assumed the dot tool can be found in the path.
  1146. DOT_PATH =
  1147. # The DOTFILE_DIRS tag can be used to specify one or more directories that
  1148. # contain dot files that are included in the documentation (see the
  1149. # \dotfile command).
  1150. DOTFILE_DIRS =
  1151. # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
  1152. # nodes that will be shown in the graph. If the number of nodes in a graph
  1153. # becomes larger than this value, doxygen will truncate the graph, which is
  1154. # visualized by representing a node as a red box. Note that doxygen if the
  1155. # number of direct children of the root node in a graph is already larger than
  1156. # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
  1157. # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
  1158. DOT_GRAPH_MAX_NODES = 50
  1159. # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
  1160. # graphs generated by dot. A depth value of 3 means that only nodes reachable
  1161. # from the root by following a path via at most 3 edges will be shown. Nodes
  1162. # that lay further from the root node will be omitted. Note that setting this
  1163. # option to 1 or 2 may greatly reduce the computation time needed for large
  1164. # code bases. Also note that the size of a graph can be further restricted by
  1165. # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
  1166. MAX_DOT_GRAPH_DEPTH = 0
  1167. # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
  1168. # background. This is disabled by default, because dot on Windows does not
  1169. # seem to support this out of the box. Warning: Depending on the platform used,
  1170. # enabling this option may lead to badly anti-aliased labels on the edges of
  1171. # a graph (i.e. they become hard to read).
  1172. DOT_TRANSPARENT = YES
  1173. # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
  1174. # files in one run (i.e. multiple -o and -T options on the command line). This
  1175. # makes dot run faster, but since only newer versions of dot (>1.8.10)
  1176. # support this, this feature is disabled by default.
  1177. DOT_MULTI_TARGETS = NO
  1178. # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
  1179. # generate a legend page explaining the meaning of the various boxes and
  1180. # arrows in the dot generated graphs.
  1181. GENERATE_LEGEND = YES
  1182. # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
  1183. # remove the intermediate dot files that are used to generate
  1184. # the various graphs.
  1185. DOT_CLEANUP = YES