Lemma is an Electromagnetics API
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.

WireAntenna.h 6.7KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235
  1. /* This file is part of Lemma, a geophysical modelling and inversion API */
  2. /* This Source Code Form is subject to the terms of the Mozilla Public
  3. * License, v. 2.0. If a copy of the MPL was not distributed with this
  4. * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
  5. /**
  6. @file
  7. @author Trevor Irons
  8. @date 12/16/2009
  9. @version $Id: WireAntenna.h 201 2015-01-03 00:07:47Z tirons $
  10. **/
  11. #ifndef __WIREANTENNA_H
  12. #define __WIREANTENNA_H
  13. #include "DipoleSource.h"
  14. #ifdef LEMMAUSEVTK
  15. #include "vtkActor.h"
  16. #endif
  17. namespace Lemma {
  18. // ===================================================================
  19. /** Class: WireAntenna
  20. * \brief Class representing a wire antennae.
  21. * \details This is an abstract class.
  22. */
  23. // ===================================================================
  24. class WireAntenna : public LemmaObject {
  25. friend std::ostream &operator<<(std::ostream &stream, const WireAntenna &ob);
  26. protected:
  27. struct ctor_key {};
  28. public:
  29. // ==================== LIFECYCLE =======================
  30. /** Locked default constructor */
  31. explicit WireAntenna ( const ctor_key& );
  32. /** Locked deserializing constructor */
  33. WireAntenna ( const YAML::Node& node, const ctor_key& );
  34. /** Destructor */
  35. virtual ~WireAntenna();
  36. /**
  37. * Initialises antenna to contain no points, with no current
  38. * and no frequency. NumberOfTurns set to 1
  39. */
  40. static std::shared_ptr<WireAntenna> NewSP();
  41. /**
  42. * Provides deep copy
  43. */
  44. virtual std::shared_ptr<WireAntenna> Clone() const ;
  45. /**
  46. * Uses YAML to serialize this object.
  47. * @return a YAML::Node
  48. */
  49. YAML::Node Serialize() const;
  50. /**
  51. * Constructs an object from a YAML::Node.
  52. */
  53. static std::shared_ptr<WireAntenna> DeSerialize( const YAML::Node& node );
  54. // ==================== OPERATORS =======================
  55. // ==================== OPERATIONS =======================
  56. /**
  57. * Approximates with evenly spaced electric dipoles around loop
  58. * @param[in] delta is the spacing between moments
  59. */
  60. virtual void ApproximateWithElectricDipoles(const Real &delta);
  61. // ==================== ACCESS =======================
  62. /**
  63. * Sets the number of turns in the loop, default is 1
  64. * @param[in] nturns is the number of turns of the loop.
  65. */
  66. void SetNumberOfTurns(const int &nturns);
  67. /**
  68. * Sets the number of points in the loop
  69. */
  70. void SetNumberOfPoints(const int &np);
  71. /**
  72. * Sets a corner point of the loop. Counting starts at 0. It
  73. * is not required to have the loop be closed right now, but
  74. * its a good idea.
  75. */
  76. void SetPoint(const int &p, const Vector3r &pos);
  77. /**
  78. * Sets a corner point of the loop. Counting starts at 0. It
  79. * is not required to have the loop be closed right now, but
  80. * its a good idea.
  81. */
  82. void SetPoint(const int &p, const Real&x, const Real& y, const Real& z);
  83. /** Sets the frequency of the current in the loop, default is 0
  84. * @param[in] ifreq is the frequency number to set
  85. * @param[in] freq is the frequency (Hz) of the current
  86. */
  87. void SetFrequency(const int& ifreq, const Real &freq);
  88. /**
  89. * Sets the number of frequencies.
  90. * @param[in] nfreq is the number of frequencies that will be
  91. * computed.
  92. */
  93. void SetNumberOfFrequencies(const int& nfreq);
  94. /**
  95. * Sets the current in the loop, default is 0
  96. * @param[in] amp is the current in the loop, in Amperes
  97. */
  98. void SetCurrent(const Real &amp);
  99. // ==================== INQUIRY =======================
  100. /**
  101. * Returns the number of turns
  102. * @return the number of turns of the loop.
  103. */
  104. int GetNumberOfTurns( );
  105. /**
  106. * Returns all of the points
  107. */
  108. Vector3Xr GetPoints();
  109. /**
  110. * Returns all of the points in a general matrix, useful for python wrapper
  111. */
  112. MatrixXr GetPointsMat();
  113. /**
  114. * Returns the frequency in the loop.
  115. * @return is the frequency in the loop in Hz
  116. */
  117. Real GetFrequency(const int& ifreq);
  118. /**
  119. * Returns the current in the loop.
  120. * @return is the Current
  121. */
  122. Real GetCurrent( );
  123. /**
  124. * Returns pointer to a dipole source
  125. */
  126. std::shared_ptr<DipoleSource> GetDipoleSource(const int &dip);
  127. /**
  128. * returns number of dipoles used to approximate this
  129. * loop
  130. */
  131. int GetNumberOfDipoles();
  132. /**
  133. * @return the number of frequencies of this wire loop.
  134. */
  135. int GetNumberOfFrequencies();
  136. #ifdef LEMMAUSEVTK
  137. /** Returns an actor that can be placed into a vtk scene easily
  138. * Note that this function throws a pointer, it is the
  139. * receivers job to manage this memory!
  140. */
  141. vtkActor* GetVtkActor(const int &idip);
  142. #endif
  143. /** Returns true or false if loop is horizontally planar
  144. */
  145. bool IsHorizontallyPlanar();
  146. /** Returns the name of the underlying class, similiar to Python's type */
  147. virtual inline std::string GetName() const {
  148. return CName;
  149. }
  150. protected:
  151. // ==================== DATA MEMBERS =======================
  152. /**
  153. * Number of points that define the loop
  154. */
  155. int NumberOfPoints;
  156. /**
  157. * Current in antennae (Amps)
  158. */
  159. Real Current;
  160. /**
  161. * Number of turns
  162. */
  163. int NumberOfTurns;
  164. /**
  165. * List of the dipoles
  166. */
  167. std::vector< std::shared_ptr<DipoleSource> > Dipoles;
  168. /**
  169. * Points that define this loop
  170. */
  171. Vector3Xr Points;
  172. /**
  173. * Frequencies of the loop.
  174. */
  175. VectorXr Freqs;
  176. private:
  177. static constexpr auto CName = "WireAntenna";
  178. }; // ----- end of class WireAntenna -----
  179. }
  180. #endif // __WIREANTENNA_H